SPARECRUX is NOT an authorized distributor for FESTO
163302 | FESTO | ISO Cylinder DNC-32-260-PPV-A-52
₹ 6,926.45
لم نتمكن من تحميل توفر الاستلام
ضمان
نقدم ضمانًا لمدة عام واحد من تاريخ الشراء للمنتجات الجديدة. بالإضافة إلى ذلك، تأتي المنتجات الفائضة/المستعملة مع ضمان لمدة 30 يومًا .
التسليم والشحن
نهدف إلى معالجة الطلبات خلال ٥-٧ أيام عمل . تختلف خيارات الشحن باختلاف الموقع، مع توفير خدمة التتبع؛ الشحن الدولي متاح مع تحمل العميل مسؤولية الرسوم الجمركية.
Elastic cushioning rings/plates and pneumatic cushioning, adjustable at both ends
Mounting Position
Optional
Design
Piston, Piston rod, Profile barrel
Position Detection
Via proximity switch / Without
Variants
Improved running performance, Extended male piston rod thread, Piston rod with female thread, Custom thread on piston rod, Piston rod with external hexagon, Extended piston rod, Clamping unit on piston rod, Protection against rotation, High corrosion protection, Dust protection, Uniform slow movement, Low friction, Through piston rod, Hollow piston rod, Heat-resistant seals (max 120°C)
Temperature Range
-40 °C … 80 °C (standard), up to 120 °C with heat-resistant seals
Operating Pressure
0.02 MPa … 1.2 MPa (0.2 bar … 12 bar)
Mode of Operation
Double-acting
Mounting Type
Via female thread
Explosion Protection
ATEX and UKEX Zones 1, 2, 21, 22; Gas: II 2G, Dust: II 2D; Ignition protection Ex h IIC T4 Gb (gas), Ex h IIIC T120°C Db (dust)
Explosion Ambient Temperature
-20°C to +60°C
Operating Medium
Compressed air to ISO 8573-1:2010 [7:4:4]
Lubrication
Lubricated operation possible (if lubricated, always required)
Corrosion Resistance Class (CRC)
2 (moderate) and 3 (high corrosion stress)
LABS (PWIS) Conformity
VDMA24364-B1/B2-L, VDMA24364 zone III
Ambient Temperature Range
-40 °C … 120 °C
Impact Energy in End Positions
0.1 J
Max Torque for Torsion Protection
0.8 Nm
Theoretical Force @ 0.6 MPa
Return stroke: 415 N, Advance stroke: 415 N … 483 N
Elastic cushioning rings/plates and pneumatic cushioning, adjustable at both ends
Mounting Position
Optional
Design
Piston, Piston rod, Profile barrel
Position Detection
Via proximity switch / Without
Variants
Improved running performance, Extended male piston rod thread, Piston rod with female thread, Custom thread on piston rod, Piston rod with external hexagon, Extended piston rod, Clamping unit on piston rod, Protection against rotation, High corrosion protection, Dust protection, Uniform slow movement, Low friction, Through piston rod, Hollow piston rod, Heat-resistant seals (max 120°C)
Temperature Range
-40 °C … 80 °C (standard), up to 120 °C with heat-resistant seals
Operating Pressure
0.02 MPa … 1.2 MPa (0.2 bar … 12 bar)
Mode of Operation
Double-acting
Mounting Type
Via female thread
Explosion Protection
ATEX and UKEX Zones 1, 2, 21, 22; Gas: II 2G, Dust: II 2D; Ignition protection Ex h IIC T4 Gb (gas), Ex h IIIC T120°C Db (dust)
Explosion Ambient Temperature
-20°C to +60°C
Operating Medium
Compressed air to ISO 8573-1:2010 [7:4:4]
Lubrication
Lubricated operation possible (if lubricated, always required)
Corrosion Resistance Class (CRC)
2 (moderate) and 3 (high corrosion stress)
LABS (PWIS) Conformity
VDMA24364-B1/B2-L, VDMA24364 zone III
Ambient Temperature Range
-40 °C … 120 °C
Impact Energy in End Positions
0.1 J
Max Torque for Torsion Protection
0.8 Nm
Theoretical Force @ 0.6 MPa
Return stroke: 415 N, Advance stroke: 415 N … 483 N
