سياسة الإرجاع خلال 30 يومًا. تعرّف على المزيد

انقر هنا للتواصل معنا.

SPARECRUX is NOT an authorized distributor for BECKHOFF

EL3356 | BECKHOFF | EtherCAT Terminal, 1-channel Analog input, Measuring Bridge, Full Bridge, 16 Bit

₹ 23,750.00

ضمان

نقدم ضمانًا لمدة عام واحد من تاريخ الشراء للمنتجات الجديدة. بالإضافة إلى ذلك، تأتي المنتجات الفائضة/المستعملة مع ضمان لمدة 30 يومًا .

التسليم والشحن

نهدف إلى معالجة الطلبات خلال ٥-٧ أيام عمل . تختلف خيارات الشحن باختلاف الموقع، مع توفير خدمة التتبع؛ الشحن الدولي متاح مع تحمل العميل مسؤولية الرسوم الجمركية.

Enquire Now
Interested in this product? Submit your enquiry by entering your details.

رقم قطعة الشركة المصنعة (MPN)

EL3356

الشركة المصنعة للمعدات الأصلية

BECKHOFF

وصف
Number of inputs 2, for 1 resistor bridge in full bridge technology
Power supply via the E-bus
Distributed clocks –
Measuring range UD max. ±27 mV
Measuring range UREF max. ±13.8 V
Internal resistance > 200 kΩ (UREF), > 1 MΩ (UD)
Supported nominal sensitivity all, parameter resolution: 0.01 µV/V; recommended: 0.5…4 mV/V
Input filter limit frequency 10 kHz low pass (-3 dB)
Conversion rate 100…4 samples/s (10…250 ms conversion time)
Power supply UV up to 12 V DC from power contacts, dependent on sensor
Resolution 16 bit, 32 bit presentation
Measurement error/uncertainty < ±0.01% for the calculated load value in relation to the final load value with a 12 V feed and 24 mV bridge voltage (hence nominal strain gauge characteristic value of 2 mV/V), self-calibration active, 50 Hz filter active
Current consumption E-bus typ. 210 mA
Current consumption power contacts depends on strain gauge supply, min. 1 mA
Special features self-calibration, quadruple averager, dynamic filters
Weight approx. 60 g
BECKHOFF

EL3356 | BECKHOFF | EtherCAT Terminal, 1-channel Analog input, Measuring Bridge, Full Bridge, 16 Bit

₹ 23,750.00
Number of inputs 2, for 1 resistor bridge in full bridge technology
Power supply via the E-bus
Distributed clocks –
Measuring range UD max. ±27 mV
Measuring range UREF max. ±13.8 V
Internal resistance > 200 kΩ (UREF), > 1 MΩ (UD)
Supported nominal sensitivity all, parameter resolution: 0.01 µV/V; recommended: 0.5…4 mV/V
Input filter limit frequency 10 kHz low pass (-3 dB)
Conversion rate 100…4 samples/s (10…250 ms conversion time)
Power supply UV up to 12 V DC from power contacts, dependent on sensor
Resolution 16 bit, 32 bit presentation
Measurement error/uncertainty < ±0.01% for the calculated load value in relation to the final load value with a 12 V feed and 24 mV bridge voltage (hence nominal strain gauge characteristic value of 2 mV/V), self-calibration active, 50 Hz filter active
Current consumption E-bus typ. 210 mA
Current consumption power contacts depends on strain gauge supply, min. 1 mA
Special features self-calibration, quadruple averager, dynamic filters
Weight approx. 60 g
عرض المنتج
العودة إلى الأعلى