SPARECRUX is NOT an authorized distributor for BOSCH REXROTH
R067001200 | BOSCH REXROTH | Super LB A Closed 12 Without Seal
₹ 5,177.73
لم نتمكن من تحميل توفر الاستلام
ضمان
نقدم ضمانًا لمدة عام واحد من تاريخ الشراء للمنتجات الجديدة. بالإضافة إلى ذلك، تأتي المنتجات الفائضة/المستعملة مع ضمان لمدة 30 يومًا .
التسليم والشحن
نهدف إلى معالجة الطلبات خلال ٥-٧ أيام عمل . تختلف خيارات الشحن باختلاف الموقع، مع توفير خدمة التتبع؛ الشحن الدولي متاح مع تحمل العميل مسؤولية الرسوم الجمركية.
R067001200 | BOSCH REXROTH | Super LB A Closed 12 Without Seal
Speeds of up to 5 m/s possible. Service life is limited by heightened wear to plastic parts. Tests have shown total travel from 50 • 10⁵ m to 100 • 10⁵ m without failure.
Length of linear bushing [mm]
32.0
Outer diameter D [mm]
22.0
Permissible ambient temperature
-10 °C ... +80 °C
Friction coefficient μ
0.001 ... 0.0025
Note: friction coefficient μ
Friction coefficients of unsealed linear bushings when lubricated with oil. The friction coefficient is lowest under heavy load, but can still be above the specified value even under a low load.
Weight [kg]
0.03
Footnote breakaway force
One wiper seal: Multiply value with factor 0.5
Footnote maximum dynamic load capacity Cmax
The dynamic load capacities are based on a total travel of 100,000 m. When based on 50,000 m, the C values in the table are to be multiplied by 1.26.
Footnote minimum dynamic load capacity Cmin
The dynamic load capacities are based on a total travel of 100,000 m. When based on 50,000 m, the C values in the table are to be multiplied by 1.26.
Footnote friction force FR
One wiper seal: Multiply value with factor 0.5
Breakaway force [N]
1.5
Dimension C h13 [mm]
32
عربة التسوق الخاصة بك
BOSCH REXROTH
R067001200 | BOSCH REXROTH | Super LB A Closed 12 Without Seal
₹ 5,177.73
سعر الوحدة /
غير متاح
Specification
Details
Shaft diameter d [mm]
12.0
Version
Standard
Format of linear bushings
Closed
Series
Super A (with self-alignment feature)
Type
Linear bushing
Seal
Without wiper seals
Lubrication
Not lubricated
Maximum dynamic load capacity Cmax [N]
1140.0
Maximum acceleration rate amax [m/s²]
150.0
Maximum permissible linear speed vmax [m/s]
3.0
Note: maximum permissible speed vmax
Speeds of up to 5 m/s possible. Service life is limited by heightened wear to plastic parts. Tests have shown total travel from 50 • 10⁵ m to 100 • 10⁵ m without failure.
Length of linear bushing [mm]
32.0
Outer diameter D [mm]
22.0
Permissible ambient temperature
-10 °C ... +80 °C
Friction coefficient μ
0.001 ... 0.0025
Note: friction coefficient μ
Friction coefficients of unsealed linear bushings when lubricated with oil. The friction coefficient is lowest under heavy load, but can still be above the specified value even under a low load.
Weight [kg]
0.03
Footnote breakaway force
One wiper seal: Multiply value with factor 0.5
Footnote maximum dynamic load capacity Cmax
The dynamic load capacities are based on a total travel of 100,000 m. When based on 50,000 m, the C values in the table are to be multiplied by 1.26.
Footnote minimum dynamic load capacity Cmin
The dynamic load capacities are based on a total travel of 100,000 m. When based on 50,000 m, the C values in the table are to be multiplied by 1.26.
