Politique de retour sous 30 jours. En savoir plus

Cliquez ici pour nous contacter.

SPARECRUX is NOT an authorized distributor for BECKHOFF

EL3356 | BECKHOFF | EtherCAT Terminal, 1-channel Analog input, Measuring Bridge, Full Bridge, 16 Bit

₹ 23,750.00

Garantie

Nous offrons une garantie d'un an à compter de la date d'achat pour les produits neufs. De plus, les articles excédentaires ou d'occasion bénéficient d'une garantie de 30 jours .

Livraison et expédition

Nous traitons les commandes sous 5 à 7 jours ouvrés . Les options d'expédition varient selon la destination, avec suivi fourni. L'expédition internationale est disponible, les droits de douane étant à la charge du client.

Enquire Now
Interested in this product? Submit your enquiry by entering your details.

Numéro de pièce du fabricant (MPN)

EL3356

Fabricant d'équipement d'origine

BECKHOFF

Description
Number of inputs 2, for 1 resistor bridge in full bridge technology
Power supply via the E-bus
Distributed clocks –
Measuring range UD max. ±27 mV
Measuring range UREF max. ±13.8 V
Internal resistance > 200 kΩ (UREF), > 1 MΩ (UD)
Supported nominal sensitivity all, parameter resolution: 0.01 µV/V; recommended: 0.5…4 mV/V
Input filter limit frequency 10 kHz low pass (-3 dB)
Conversion rate 100…4 samples/s (10…250 ms conversion time)
Power supply UV up to 12 V DC from power contacts, dependent on sensor
Resolution 16 bit, 32 bit presentation
Measurement error/uncertainty < ±0.01% for the calculated load value in relation to the final load value with a 12 V feed and 24 mV bridge voltage (hence nominal strain gauge characteristic value of 2 mV/V), self-calibration active, 50 Hz filter active
Current consumption E-bus typ. 210 mA
Current consumption power contacts depends on strain gauge supply, min. 1 mA
Special features self-calibration, quadruple averager, dynamic filters
Weight approx. 60 g
BECKHOFF

EL3356 | BECKHOFF | EtherCAT Terminal, 1-channel Analog input, Measuring Bridge, Full Bridge, 16 Bit

₹ 23,750.00
Number of inputs 2, for 1 resistor bridge in full bridge technology
Power supply via the E-bus
Distributed clocks –
Measuring range UD max. ±27 mV
Measuring range UREF max. ±13.8 V
Internal resistance > 200 kΩ (UREF), > 1 MΩ (UD)
Supported nominal sensitivity all, parameter resolution: 0.01 µV/V; recommended: 0.5…4 mV/V
Input filter limit frequency 10 kHz low pass (-3 dB)
Conversion rate 100…4 samples/s (10…250 ms conversion time)
Power supply UV up to 12 V DC from power contacts, dependent on sensor
Resolution 16 bit, 32 bit presentation
Measurement error/uncertainty < ±0.01% for the calculated load value in relation to the final load value with a 12 V feed and 24 mV bridge voltage (hence nominal strain gauge characteristic value of 2 mV/V), self-calibration active, 50 Hz filter active
Current consumption E-bus typ. 210 mA
Current consumption power contacts depends on strain gauge supply, min. 1 mA
Special features self-calibration, quadruple averager, dynamic filters
Weight approx. 60 g
Voir le produit
Retour en haut